Aerospace Castings
Military Castings
Precision Investment Castings
Prototype Castings
Aluminum Investment Castings
Copper Alloy Investment Castings
Request a Quote
Upload Drawings
Aluminum Alloys Chart
| Alloy | Similar Designation |
Usual Condition |
Castability | Machinability |
| A 201 (A02010) | AMS 4223 MIL A 2180 MIL C 19194 |
T6 | 5 | 1 |
| 354 (A03540) | MIL A 2180 | T6 | 1 | 3 |
| 355 (A03550) | ASTM B26 ASTM B618 |
T6 | 2 | 3 |
| C 355 (A33550) | AMS 4215 MIL A 21180 ASTM B615 |
T6 | 2 | 3 |
| 356 (A03560) | AMS 4260 ASTM B26 |
T6 | 1 | 4 |
| A 356 (A13560) | AMS 4218 | T6 | 1 | 4 |
| A 357 (A13570) | AMS 4219 | T6 | 2 | 3 |
| 514 (A05140) | 214, ASTM 0618 ASTM B26 |
As-Cast | 5 | 1 |
| 535 (A05350) | Almag 35 AMS 4239 |
As-Cast | 4 | 1 |
| 712 (A07120) | ASTM B26 40E | As-Cast 3 wks. Aging | 4 | 1 |
| 713 (A07130) | ASTM B26 Tenzalloy |
As-Cast 3 wks. Aging | 4 | 1 |
| Alloy | Machinability | Conosion Resistance | Weldability | Hardanable | Density (g/cm3) | As-Cast Tensile Strength (psi) |
| A 201 (A02010) | 1 | 4 | 4 | Yes | 2.8 | |
| 354 (A03540) | 3 | 3 | 1 | Yes | 2.7 | |
| 355 (A03550) | 3 | 3 | 2 | Yes | 2.7 | 23,000 |
| C 355 (A33550) | 3 | 3 | 2 | Yes | 2.7 | |
| 356 (A03560) | 4 | 2 | 2 | Yes | 2.7 | 24,000 |
| A 356 (A13560) | 4 | 2 | 2 | Yes | 2.7 | 23,000 |
| A 357 (A13570) | 3 | 2 | 1 | Yes | 2.7 | 25,000 |
| 514 (A05140) | 1 | 1 | 2 | No | 2.7 | 25,000 |
| 535 (A05350) | 1 | 1 | 5 | No | 2.6 | 40,000 |
| 712 (A07120) | 1 | 3 | 4 | Yes | 2.8 | 35,000 |
| 713 (A07130) | 1 | 3 | 4 | Yes | 2.8 | 32,000 |
| Alloy | As-Cast Tensile Strength (psi) | As-Cast Yield Strength (psi) | As-Cast Elongation (%) | As-Cast Hardness | Annealed Tensile Strength (psi) | Annealed Yield Strength (psi) | Annealed Elongation (%) |
| A 201 (A02010) | |||||||
| 354 (A03540) | |||||||
| 355 (A03550) | 23,000 | 12,000 | 3 | HRE 55/70 | |||
| C 355 (A33550) | |||||||
| 356 (A03560) | 24,000 | 18,000 | 6 | HRE 50/65 | |||
| A 356 (A13560) | 23,000 | 12,000 | 6 | HRE 50/65 | |||
| A 357 (A13570) | 25,000 | 13,000 | 5 | HRE 50/65 | |||
| 514 (A05140) | 25,000 | 12,000 | 3 | HRE 60 | |||
| 535 (A05350) | 40,000 | 20,000 | 13 | HRE 80 | |||
| 712 (A07120) | 35,000 | 25,000 | 5 | HRE 80 | |||
| 713 (A07130) | 32,000 | 22,000 | 3 | HRE 80 |
| Alloy | Heat Treated Tensile Streangth (psi) | Heat Treated Yield Strength (psi) | Heat Treated Elongation (%) | Heat Treated Hardness | Comments |
| A 201 (A02010) | 67,000 | 59,000 | 7 | HRB 80 | Highest strength alloy, excellent machinability. |
| 354 (A03540) | 50,000 | 38,000 | 4 | HRE 75/95 | High strength. |
| 355 (A03550) | 35,000 | 25,000 | 3 | HRE 73/98 | Good st rength and corrosion resistance, Leak proof and pressure-tight. |
| C 355 (A33550) | 38,000 | 25,000 | 5 | HRE 80/100 | Premium quality 355 alloy. |
| 356 (A03560) | 33,000 | 24,000 | 3 | HRE 73/93 | Most popular aluminum alloy, Good strength, corrosion resistance, and stability. Pressure-tight. |
| A 356 (A13560) | 38,000 | 28,000 | 5 | HRE 73/93 | Premium quality 356 alloy. Poor brazability. Good weldability. |
| A 357 (A13570) | 45,000 | 35,000 | 3 | HRE 75/95 | Premium quality alloy. Higher strength than A 356. |
| 514 (A05140) | Excellent for anodizing. | ||||
| 535 (A05350) | Maximum properties in te as-cast condition. Good for marine and other highly corrosive applications. |
||||
| 712 (A07120) | Good Brazing alloy. Self aging. | ||||
| 713 (A07130) | Excellent machinability. |
Curved Holes | Flatness (Dish) | Hole Tolerance | Internal Radii, Fillet | Investment Casting Advantages | Investment Casting Capabilities | Military Castings
Out of Roundness | Parallelism | Perpendicularity | Precision Investment Castings |Positioning | Prototype Castings | Roundness | Standard Linear Tolerances
Straightness | Surface Textures | Tapered Holes | Variables | Investment Casting Site Map
Londonderry, NH Website Design Development